Home Spray Foam LLC is one of the leading spray foam roofing contractors in Oregon. In addition to their arsenal of open-cell and closed-cell foam insulation systems, Home Spray Foam & Insulation helps you seal the building envelope with an array of spray foam roof insulation products.
Foam-Lok™ Spray Foam and Thermo-Flex Acrylic Coating Systems
Why replace and re-coat your roof when you can create better insulation with the same foundation? The Foam-Lok™ Spray Foam and Thermo-Flex Acrylic Coating System are designed to apply directly to your existing roof substrate, insulating your residential or commercial building without costly re-roofing or land-fill fees.
Call For Free Estimates:
(541) 357-4275 Eugene Office
(541) 480-1789 Bend Office
(541) 461-1513 Fax
Or, send the owners an email by completing the form on the Contact Us page.
Foam-Lok™ Spray Foam Roofing System
Foam-Lock Spray Foam is a sprayed polyurethane foam that can be applied to any shape roof, especially flat or low-pitched roof configurations. The advantage of polyurethane foam roofing lies in its lightweight seal and excellent temperature control. By sealing the building envelope, Foam-Lock Spray Foam stops heat from escaping and minimizes air conditioning loss with as little as one inch of foam on top of your existing roof system.
Spray foam insulation eliminates the cost of excess materials by self-flashing in corners that would otherwise need clamping rings, flashing or sealants. This means spray foam roof insulation can also be applied to vertical surfaces, seamlessly covering joints and angles. It even fills in uneven sections of roof, eliminating pooling water and strengthening your roof against weathering. Home Spray Foam & Insulation can help you find the right Foam-Lock Spray Foam solution to fit your roofing needs.
Foam-Lok™ Spray Foam Roofing Products:
LPA2500 – LPA 2800 – LPA 3000 and Agricultural LPA 3500 – LPA 6000
- Two-component, polyurethane, closed-cell foam
- Designed for high performance
- Applicable to a diverse array of roof deck configurations
LPA2500, LPA 2800 and LPA 3000 Foam-Lok™ Spray Foam are specifically recommended for roofing and tank insulation specifications.
Agricultural LPA 3500 and LPA 6000 are intended for use in non-rated agricultural applications for insulated and structural support.
LPA2500, LPA 2800, LPA 3000 and LPA 3500 Credentials:
Thermo-Flex Acrylic Coating Systems
Thermo-Flex Acrylic Coating, primed with Thermo-Prime, is the roof sealant component within the Spray Polyurethane Foam (SPF) roofing system. With 100% adhesion, and a coat that fills each crack and cranny, insulating your roof with Thermo-Flex Acrylic Coating preserves energy and protects the life of both commercial and residential roofs. With six different Thermo-Flex acrylic coatings to choose from, there is a Thermo-Flex Foam and roof coating system that will work for your roofing or re-roofing project. Call Home Spray Foam & Insulation to get a free quote today.
Thermo-Flex Acrylic Coating Products:
- Thixotropic, acrylic elastomeric coating
- Formulated to protect polyurethane foam insulation.
TF 250 – Thermo-Flex 250 is designed to withstand intense heat and ultra-violet rays in low-humidity desert environments.
TF 500 – Thermo-Flex 500 is designed to withstand damp heat and ultra-violet rays of humid environments.
TF 750 – Thermo-Flex 750 is a high solids, fire retardant coating designed to withstand the intense heat and ultra-violet rays in low-humidity desert environments.
TF 1000 – Thermo-Flex 1000 is a high solids designed to withstand the damp heat and ultra-violet rays in humid environments.
TF 1000QS – Thermo-Flex 1000QS (quick set) is a high solids, fire retardant coating designed to withstand damp heat and ultra-violet rays in low-humidity desert environments. Its quick set feature is especially useful before or after a light rain.
TF 1000FS –Thermo-Flex 1000FS (fast set) is a high solids, fire retardant coating designed to withstand damp heat and ultra-violet rays in high-humidity environments. Its fast set feature is helpful in conditions where impending hard rain is due within 30 minutes.
All Thermo-Flex Acrylic Coating products are available in White, Gray and Tan.
Thermo-Prime and Thermo-Caulk Products:
Thermo-Prime Acrylic Roof PrimerTM is a single component, water based, acrylic primer that helps spray on polyurethane foam bond to a variety of roofing substrates including BUR, modified bitumen, concrete, masonry, galvanized metal and wood. With a water-based primer, you won’t have to worry about any nasty odor stinking up the roof spraying process.
Thermo-Caulk Coating Systems is made up of 100% acrylic resins. It is a single component, water-based, high performance, elastomeric sealant. When this knife-grade caulking cures, it forms a durable, flexible membrane to seal out moisture. Thermo-Caulk thus creates a waterproof seal around any weak points including roof seams, termination points, cracks, flashing, vents, skylights, fasteners, parapets, protrusions and duct work. It can also be used with roof fabric for spot strengthening.